Plated Copper Nozzles – Volcano
Durable, non-stick, extremely high temperature performance Volcano nozzles. Take your your 3D printing to the next level by modifying your Volcano with these nozzles. Made from a unique copper alloy, they will not begin to soften or anneal below 500°C, and they are highly resistant to debris and burnt-on plastic thanks to their nickel coating. Compatible with the Lulzbot Moarstruder.
NUMBER OF DOTS |
NOZZLE DIAMETER |
|---|---|
| 0 | 0.60mm |
| 1 | 0.80mm |
| 2 | 1.00mm |
| 3 | 1.20mm |
| 4 | 0.40mm |
These nozzles are engineered for ultimate high temperature performance. Made from a special high temperature copper-alloy with a softening point of well above 500°C, and with much-increased thermal conductivity these copper nozzles are perfect for high temperature applications, while working perfectly with everyday filaments like PLA, ABS and spoolWorks EDGE.
In addition to high temperature performance these nozzles have an advanced nickel based plating, considerably reducing the adhesion of plastic to the nozzle. This is great for everyday filaments keeping things clean and shiny, but is particularly important at temperatures above 300°C where a silicone sock can’t be used.
Copper has more than 3x the thermal conductivity of brass, and the copper alloy we use has been hardened and treated to reduce the oxidation that occurs in copper at high temperatures. The higher thermal conductivity will also slightly increase your heat-up times, and can provide tighter temperature control.
This copper-alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500°C, making it perfect for the high-temperature printing that other nozzles can’t handle.
E3D nozzles are easily identified by the number of hex flats drilled with dots (see table).
Reviews
There are no reviews yet.