Plated Copper Volcano Upgrade Kit-12V-1.75mm (VOLCANO-STARTER-COP-12V-175)

Print big and fast! The plated copper Volcano upgrades your V6 or Aero HotEnd to print bigger, faster, and stronger parts. Easily swap your V6 heater block and nozzles to Volcano for large-scale 3D printing. Plated Copper-Alloy Volcano Heater Block These blocks are engineered for ultimate high temperature performance. Made from a special high temperature copper-alloy with a softening point of well above 500C (compared to aluminium blocks which begin to lose integrity beyond 350?C), and much-increased thermal conductivity these copper blocks are perfect for high temperature applications while working perfectly with everyday filaments like PLA, ABS and spoolWorks EDGE. In addition to high temperature performance these blocks have an advanced nickel based plating, this plating considerably reduces the adhesion of plastic to the block. This is great for everyday filaments keeping things clean and shiny, but is particularly important at temperatures above 300?C where a silicone sock can’t be used. A plated copper nozzle is included for the ultimate extrusion pairing! Why Copper? Copper has more than 3x the thermal conductivity of brass, and the copper alloy has been plated to eliminate the oxidation that occurs in copper at high temperatures. A small side effect is that the copper’s high thermal mass will also increase heat-up times, but will provide a tighter temperature control. This copper-alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500?C. It’s perfect for the high-temperature printing that aluminium heater blocks can’t handle. What’s in the Box: 1x Volcano Plated Copper Block 1x Volcano Plated Copper Nozzle – 0.80mm 1x Molex cable 1000 1x Thermistor cartridge 1x Thermal Compound Paste 1x V6 Fixing Kit 1x High precision heater cartridge – 1000mm